Acta Geodynamica et Geomaterialia

Title: ASSESSMENT OF POZZOLANIC MATERIAL FOR MANUFACTURING OF PORTLAND POZZOLANA CEMENT (PPC) BY THE COMPARISON OF ORDINARY PORTLAND CEMENT (OPC)
Authors: Khan Adnan, Rukhsar Syeda and Adnan Muhammad
DOI: 10.13168/AGG.2022.0002
Journal: Acta Geodynamica et Geomaterialia, Vol. 19, No. 2 (206), Prague 2022
Full Text: PDF file (1.0 MB)
Keywords: Slate, Pozzolan, PPC, Cement, Bela District, Industry.
Abstract: In the present study physicochemical characterization of slate sample was carried out which was collected from slate mine in Lasbela District, Baluchistan. Slate was evaluated for its effectiveness as partial replacement of ordinary Portland cement (OPC) in the production of Portland Pozzolana cement (PPC). The grain size analysis of crushed slate sample using ball mill revealed that maximum fraction retained on 44 μm was about 72.8 %. Sum of the major oxides (SiO2 + Al2O3 + Fe2O3) is about 90.09 % that meet the requirement as per ASTM C 618 (minimum 70.0 %). Other oxides including SO3 (<0.05), CaO (4.04), MgO (1.66), K2O (0.10), Na2O (0.16), TiO2 (0.35), MnO (<0.02) and Cl (0.12) also meet the international standard of ASTM C 618 for PPC. OPC without and with using slate sample in a ratio of 5 % and 10 % with clinker was tested to measure compressive strength, physical tests and setting time. The results showed that after 5 % and 10 % replacement, insignificant effect was observed on the physical properties, setting time and compressive strength in 2-, 7- and 28-days curing. Hence, slate can be used as natural pozzolan for manufacturing PPC. It is cost effective for the production of cement as well as to sustain the resources of limestone for long time and reducing emission of CO2 in the environment. It can also be used in the sulfate rich environment, coastal areas especially for the construction of dams and bridges.