Acta Geodynamica et Geomaterialia

Title: CHARACTERISTICS OF THE FOUNDATION ROCKS USING GEOPHYSICAL TECHNIQUES: A CASE STUDY FOR THE EGYPTIAN SOLAR PLANT SITE, ASWAN, EGYPT
Authors: Mohamed Abdelnasser, Abdelhafiez Hesham and Ali Sayed
DOI: 10.13168/AGG.2022.0009
Journal: Acta Geodynamica et Geomaterialia, Vol. 19, No. 3 (207), Prague 2022
Full Text: PDF file (7.6 MB)
Keywords: shallow seismic refraction, MASW, site characterization, NEHRP
Abstract: The main target of the present study is to investigate the foundation layers and the subsurface structures in an Egyptian solar plant site using geophysical techniques including the seismic refraction and Multichannel Analysis of Surface Waves (MASW). The studied solar park is situated at about 40 km to the north of Aswan city on the Aswan-Cairo highway road and is classified as the largest solar plant in Africa and worldwide. Due to its location in the vicinity of the most prone earthquake area in Egypt (Aswan seismic zone); it is imperative to mitigate the earthquake hazard in this region. The geophysical results show that the subsurface foundation in this site is primarily composed of two layers. The upper one is loose and incompetent soil sediments that extend down to about 10 m depth with P-wave velocity ranging from 400 to 1000 m/s and shear-wave velocity ranging from 260 to 550 m/s. The deeper section is considered the main foundation layer with velocities ranging between 650 and 1900 m/s and from 350 to 950 m/s for P-wave and shear-wave, respectively. The average shear-wave velocities calculated for the topmost 30 m (Vs30) vary almost between 319 and 834 m/s; thereby the studied site is primarily ranked into classes C&D (180-360 m/s & 360-760 m/s, respectively) according to the National Earthquake Hazards Reduction Program (NEHRP) soil classification. Additionally, the southwestern and southeastern zones of the site area are characterized by maximum velocity values, relative high values of rock densities, rigidity or shear modulus “μ”, Standard Penetration Test (N-Value), ultimate bearing capacity and allowable bearing capacity, while the low values are observed through the northern and middle sectors across the area. This study an integral part of many works being carried out delineating the subsurface foundation structures around the solar plant and allows the most appropriate sites for constructing the renewable energy plants to be sited away from the highly hazards prone areas.